Indexado em
  • Banco de Dados de Periódicos Acadêmicos
  • Genamics JournalSeek
  • Chaves Acadêmicas
  • JournalTOCs
  • Infraestrutura Nacional de Conhecimento da China (CNKI)
  • Scimago
  • Acesso à pesquisa on-line global em agricultura (AGORA)
  • Biblioteca de periódicos eletrônicos
  • RefSeek
  • Diretório de Indexação de Periódicos de Pesquisa (DRJI)
  • Universidade de Hamdard
  • EBSCO AZ
  • OCLC- WorldCat
  • Catálogo online SWB
  • Biblioteca Virtual de Biologia (vifabio)
  • publons
  • MIAR
  • Comissão de Bolsas Universitárias
  • Fundação de Genebra para Educação e Pesquisa Médica
  • Euro Pub
  • Google Scholar
Compartilhe esta página
Folheto de jornal
Flyer image

Abstrato

Statistical Enhancement of Cyanide Degradation Using Microbial Consortium

Virender Kumar, Vijay Kumar and Tek Chand Bhalla

Remediation of cyanide contaminated water bodies using microorganisms is a popular alternative over chemical and physical methods of cyanide detoxification. The objective of the present study is to develop a microbial consortium using three bacteria, i.e., Enterobacter sp. RL2a, Serratia marcescencs RL2b and Achromobacter sp. RL2c for effective degradation of simulated cyanide wastewater. In vitro cyanide degradation was optimum with 2% inoculum volume of cells; pH 6.0, 30°C temperature at 20 mM substrate concentration leading to complete cyanide removal in 36 h. Response surface methodology (RSM) approach was used for optimization of reaction conditions for cyanide degradation using 5 mg ml-1 resting cells of microbial consortium. Plackett-burman design depicted that three variables viz. time, resting cells of strain RL2b and pH exhibit positive effect on cyanide degradation. The analysis of the quadratic regression model suggested that the model was very significant as correlation coefficient (0.847) closer to 1 denotes better correlation between the observed and predicted responses. The model was validated by performing the experiment under optimum conditions, which resulted in 63% cyanide degradation in 1 h reaction and complete degradation of 20 mM cyanide in 6 h. By performing factorial design, there was 1.3 fold (33%) increases in cyanide degradation.

Isenção de responsabilidade: Este resumo foi traduzido usando ferramentas de inteligência artificial e ainda não foi revisado ou verificado